| Customization: | Available |
|---|---|
| Application: | for Quarrying ,Profiling Granite /Marble |
| Type: | Power Tool Parts |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Fast cutting diamond wire saw marble granite stone cutting ropes
The wire saw is used for cutting quarries, for squaring blocks or special-shaped block processing.
Three essential components for diamond wire saw are as followed:
1. Steel cable with diefferent diameter depending on the application
2. Sintered diamond beads.
3. Fixed method: springs, rubber or plastic. Protects the steel cable because of stone abrasive, and also sbsorbs the energy of the cutting friction of the beads against the stone.
Our advantages:
1. High efficiency, safe, low-noise, less-dust, and enviroment-friendly.
2. Good cutting with small slot.
3. Few breakage raito at working thus sound lifetime.
4. Professional engineers, experienced workers, strict quality control system, top quality material etc. ensure the stable quality.
5. Other specifications are available upon request.
| Diameter (mm) |
Connection | Beads/meter | Linear Speed(m/s) | Application |
|---|---|---|---|---|
| 8.5/8.8 | Plastic+spring | 37 | 20-30 | Granite Sandstone |
| 11 | Plastic | 40 | 20-30 | Granite Sandstone |
| 11.5 | Plastic | 40 | 20-30 | Granite Sandstone |
| 11.5 | Plastic+spring | 40 | 20-30 | Granite Sandstone |
| 8.5/8.8 | Plastic | 37 | 25-35 | Marble |
| 11 | Spring | 28 | 25-35 | Marble |
| Application | Assembly | Stone hardness | Feeding speed | Output | Lifespan |
| Granite quarry Dia11.5mm | Sinter+Rubber | Soft Granite | 25-30m/s | 4-6m2/h | 15-25m2/m |
| Medium hard | 22-26m/s | 2-5m2/h | 8-15m2/m | ||
| Hard Granite | 18-23m/s | 1-2.5m2/h | 4-9m2/m | ||
| Granite Block dressing Dia11.0mm | Sinter+Plastic | Soft Granite | 25-28m/s | 60-100cm/h | 15-25m2/m |
| Medium hard | 22-25m/s | 40-60cm/h | 10-17m2/m | ||
| Hard Granite | 20-23m/s | 25-45cm/h | 8-12m2/m | ||
| Granite profiling wire Dia8.8mm | Soft Granite | 25-29m/s | 6-10m3/h | 17-22m3/m | |
| Plastic | Medium hard | 22-25m/s | 4-6m3/h | 12-17m3/m | |
| Hard Granite | 20-23m/s | 2.5-4.5m3/h | 10-14m3/m |
Diamond Granite Quarry wire:
Diamond Granite Block dressing wire for Stationary wire saw machine
Diamond Granite Profiling wire for Stationary wire saw machine:
Diamond Marble Wire Performance:
| Application | Assembly | Stone hardness | Feeding speed | Output | Lifespan |
| Marble quarry Dia11.0mm | Sinter+Rubber | Soft Marble | 35-40m/s | 10-20m2/h | 40-70m2/m |
| Medium hard | 33-38m/s | 8-16m2/h | 25-45m2/m | ||
| Hard Marble | 30-35m/s | 5-8m2/h | 20-30m2/m | ||
| Sinter+Rubber | Soft Marble | 35-40m/s | 10-20m2/h | 35~55m3/m | |
| Medium hard | 33-38m/s | 8-16m2/h | 15~35m3/m | ||
| Hard Marble | 30-35m/s | 5-8m2/h | 10~25m3/m | ||
| Vacuum brazed +Spring | Soft Marble | 52-60m/s | 15-30m2/h | 33-58m2/m | |
| Medium hard | 50-57m/s | 15-24m2/h | 28-38m2/m | ||
| Hard Marble | 45-53m/s | 8-12m2/h | 17-25m2/m |
Diamond Marble quarry Wire Dia11.0mm Sinter+Rubber
Diamond Marble quarry Wire Dia11.0mm Sinter+Spring
Marble block dressing Wire & profiling wire perofrmance:
| Application | Assembly | Stone hardness | Feeding speed | Output | Lifespan |
| Marble Block dressing Dia11.0mm | Sinter+Plastic | Soft Marble | 30-35m/s | 90-130cm/h | 40-60m2/m |
| Medium hard | 28-32m/s | 70-100cm/h | 25-40m2/m | ||
| Hard Marble | 26-30m/s | 60-80cm/h | 20-30m2/m | ||
| Marble profiling wire Dia8.8mm | Sinter+Plastic | Soft Marble | 30-35m/s | 100-150cm/h | 35-45m3/m |
| Medium hard | 28-32m/s | 80-120cm/h | 30-40m3/m | ||
| Hard Marble | 26-30m/s | 70-100cm/h | 25-30m3/m |
Attention:
1. Regular inspections of diamond wire self rotation and adjust in time.
2. Regular inspections of diamond wire abrasion to avoid cut-in-one-side problem happened, and make the solution in time if occurs.
3. Regular inspections the joint, as well as the beads of two sides, if they are abrase badly, replaces them in time.
4. The steel cable tension of the stationary machines should be controlled within 250-300kg(φ4-5mm).
5. Linear speed is ajusted according to stones hardness.
6. For the new wire, when start to cut, its linear speed should be slower 2-3m/s than the standard mentioned above, it is good for sharpen.
){kind=link}